Ryobi Sanders: The ONE+ Lineup Sorted by Job and Budget

As an Amazon Associate I earn from qualifying purchases.
All claims are strictly my personal opinion.

My top pick

Ryobi ONE+ 18V 5" Random Orbit Sander

Ryobi ONE+ 18V 5" Random Orbit Sander

10,000 OPM, 3/32" orbit and a dust bag, sold bare for anyone who already owns ONE+ batteries.

Ryobi sander lineup with a cordless orbital sander and a detail sander in a home garage

Ryobi is the entry-level sander brand for anyone who already owns 18V ONE+ batteries, and the Ryobi sander most DIYers should start with is the ONE+ 5″ random orbit sander: 10,000 orbits per minute, a 3/32″ orbit, a 5″ pad and an on-board dust bag, sold bare so your existing batteries do the work. Add the Corner Cat for tight spots and the P450 belt sander if you strip or shape wood, and that is the whole cordless lineup most garages need.

Below is every Ryobi sander worth a look, sorted by job: what each one does, what its maker publishes about it, and who should skip it. Where Ryobi’s own pages do not state a figure, I say “not stated” instead of guessing.

Every Ryobi Sander at a Glance

The table lists the figures Ryobi publishes on its own product pages, read on November 20, 2026. A blank “not stated” means the page does not give the number.

Product ⭐ ONE+ 5″ Random Orbit
🏆 EDITOR’S CHOICE
ONE+ Corner Cat P401 ONE+ Belt Sander P450 Corded 1/4 Sheet S652DGK
Image Ryobi ONE+ 18V 5 inch random orbit sander Ryobi ONE+ Corner Cat finish sander Not shown Not shown
Price $$ $$ $$$ $$
Power 18V ONE+, bare tool 18V ONE+, bare tool 18V ONE+, brushless, bare tool Corded, 2.0 A
Pad or belt 5″ pad Corner pad, size not stated 3″ x 18″ belt 4-1/4″ x 4-1/2″ pad
Speed 10,000 OPM 11,000 OPM Up to 850 FPM 14,000 OPM
Weight 2.5 lb 1.35 lb 7.6 lb 3.1 lb
Dust On-board bag Port, attachment sold separately Dust bag included Dust bag included
Best For First sander for ONE+ owners Corners, trim, small parts Shaping and stripping wood Corded finishing, no battery
Availability Shop Now Shop Now Ryobi retailers Ryobi retailers

Key takeaways

  • Ryobi’s cordless sanders are sold as bare tools: the battery and charger are extra, so the value is highest if you already own ONE+ batteries.
  • For general sanding, start with the 5″ random orbit sander; add the Corner Cat for corners.
  • The P450 belt sander is the only Ryobi here that removes wood fast, and at 7.6 lb it is a heavy one-hand tool.
  • Ryobi sells through Home Depot in stores; on Amazon, listings are often from independent sellers, so check the seller before you buy.

Which Ryobi Sander Does What

Ryobi’s sanders split into three jobs, and picking by job is simpler than picking by model number.

Finishing Sanders

A random orbit sander moves its round pad in small random loops, so it removes wood quickly without leaving straight scratch lines. It is the tool for flat surfaces: tabletops, doors, cabinet sides, decks. The Ryobi ONE+ 5″ model is this tool.

Detail Sanders

A detail sander has a pointed or triangular pad that reaches into corners where a round pad cannot. The Corner Cat is Ryobi’s version. It will not clear a big panel quickly, but it finishes the edges a random orbit leaves behind. If you are choosing between the two types, my best detail sanders page explains the trade-off in more depth.

Belt Sanders

A belt sander runs a continuous loop of sandpaper in a straight line and removes material fast. It is for leveling, shaping and stripping, not for finishing. Ryobi’s cordless belt sander is the P450 below, and I keep the full belt sander comparison on my belt sander reviews page.

Ryobi ONE+ 18V Random Orbit Sander (P411 and PCL406B)

Ryobi has sold more than one 5″ cordless random orbit sander under the ONE+ name, so the model number matters when you shop. The two you will meet are the P411 and the PCL406B, and Ryobi’s own pages list the same core figures for both.

Editor's ChoiceCordless random orbit sander

Ryobi ONE+ 18V 5" Random Orbit Sander

Ryobi ONE+ 18V 5″ Random Orbit Sander

Ryobi ONE+ 18V 5″ Random Orbit Sander

A 5" cordless random orbit with a 3/32" orbit at 10,000 OPM, sold as a bare tool for ONE+ owners.

18V ONE+, bare toolPower
5"Pad
10,000 OPMSpeed
3/32"Orbit
2.5 lbs (P411)Weight
$$Price

Check price on AmazonSpecs: Ryobi

Best for

ONE+ owners who want one general finishing sander.

  • Works with existing ONE+ batteries
  • 2.5 lb on the P411
  • On-board dust bag

Skip it if

You need fast stock removal: the belt sander cuts faster.

  • Battery and charger not included
  • Small orbit, slower stock removal
Read full review

Best Ryobi for a First Cordless Sander

Ryobi lists the P411 at 10,000 orbits per minute with a 3/32″ orbit diameter, a 5″ pad and a weight of 2.5 lb, and says it has an on-board dust collection bag and a 3-year limited warranty. The PCL406B page gives the same 10,000 OPM and 3/32″ orbit and lists dust collection through 1-1/4″ and 1-7/8″ hoses, so that version can connect to a shop vacuum. Ryobi does not state a weight for the PCL406B.

A 3/32″ orbit is a fine-finishing orbit, on the small side. It leaves a smooth surface and removes stock more slowly than a larger-orbit sander, which suits furniture, trim and prep before paint. For heavy removal, the belt sander further down is the better Ryobi. The tool ships without a battery, so what you can sand per charge depends on the ONE+ battery you add; Ryobi does not state a runtime for this sander.


The HP Brushless Version

Ryobi also lists an 18V ONE+ HP brushless 5″ random orbit sander, model PBLSD01. Its page gives a variable speed range of 7,000 to 11,000 OPM, the same 3/32″ orbit, a 1-1/4″ and 1-7/8″ dust port with an included dust bag, and a 3-year limited warranty. Ryobi does not state a weight or a separate pad size on that page. If you want speed control for delicate surfaces, the variable speed is the reason to look at it.

Ryobi Corner Cat Detail Sander (P401)

Cordless detail sander

Ryobi ONE+ Corner Cat P401

Ryobi ONE+ 18V Corner Cat Finish Sander

Ryobi ONE+ 18V Corner Cat Finish Sander

A 1.35 lb corner sander at 11,000 OPM for trim and tight spaces.

18V ONE+, bare toolPower
11,000 OPMSpeed
1.35 lbsWeight
not statedPad
$$Price

Check price on AmazonSpecs: Ryobi

Best for

Trim, corners and small repairs.

  • 1.35 lb
  • Reaches corners
  • On-board dust port

Skip it if

You only sand large flat panels.

  • Dust attachment sold separately
  • Slow on large surfaces
Read full review

Best Ryobi for Corners, Trim and Small Parts

The P401 Corner Cat is built around its shape: Ryobi says the unique shape allows the user to sand easily in corners and tight spaces. It runs at 11,000 OPM no load and weighs 1.35 lb. It has an on-board dust port that accepts an optional dust collection attachment, and the attachment is sold separately. The box includes the tool, three pieces of sandpaper and the manual, with a 3-year limited warranty.

The Amazon listing I link carries both the P401 and the newer PCL416 Corner Cat numbers, so confirm the model on the listing. Ryobi does not state the pad dimensions on its page, so check the listing for the pad size and the sandpaper it takes before you buy replacement sheets. Because the tool is small and light, it suits window frames, chair spindles, louvered doors and the inside corners of cabinets. Ryobi also sells it in two-tool kits with the 5″ random orbit sander, which is the sensible way to buy both if you need a bare-tool pair.


Ryobi Belt Sander (P450)

Belt sanding is its own topic and I cover it fully elsewhere, so this is the short version for Ryobi buyers.

Ryobi ONE+ 18V Brushless 3″ x 18″ Belt Sander

Best Ryobi for Fast Stock Removal

Ryobi describes the P450 as a brushless 18V ONE+ belt sander with a 3″ x 18″ belt and belt speed up to 850 FPM. The page says the brushless motor provides “corded performance with cordless convenience.” It weighs 7.6 lb, comes with a dust bag and an 80-grit belt, and carries a 3-year limited warranty. I don’t link an Amazon listing for it; Ryobi’s retailers carry it.

A 3″ x 18″ belt is the standard size for a portable belt sander, so replacement belts are easy to find. The weight comes mostly from the tool itself, and a belt sander this size is a two-handed job on a vertical surface. Use it to flatten a glued-up panel, level a stubborn board or strip old finish from flat wood. For a deeper look at belts, speed and what to compare, see my belt sander reviews.

Ryobi also lists a smaller PSD101B file sander with a 1/2″ x 18″ belt, 3.2 lb and a belt speed of 880 to 2,065 FPM. It is a different tool for tight work, not a replacement for the P450.

  • ✅ Brushless motor, up to 850 FPM
  • ✅ Dust bag and an 80-grit belt included
  • ✅ Standard 3″ x 18″ belt size
  • ❌ 7.6 lb, heavy for long overhead or vertical work
  • ❌ Battery and charger not included

Best For: DIYers who strip or level flat wood and want a cordless belt sander on the battery system they already own.


Corded Ryobi Sanders

Ryobi still lists corded sanders for people who do not want to buy batteries. The one I could confirm from Ryobi’s own page is the S652DGK 1/4 sheet sander: a 120V, 2.0 amp motor, 14,000 OPM no load, a 4-1/4″ x 4-1/2″ pad, a net weight of 3.1 lb and a dust bag in the kit, with a 3-year limited warranty.

Ryobi has also sold a corded 5″ random orbit sander, but I could not confirm its current model and specifications from Ryobi’s own pages, so I am not quoting any. Corded models change status more often than ONE+ tools, so check that the model you want is still listed before you plan around it. Corded sanders suit a workshop where the sander runs for long stretches, because there is no battery to swap.

Choose If
Cordless ONE+ You already own ONE+ batteries and sand in short sessions around the house.
Corded You sand for long stretches in one place and have no ONE+ batteries.

If you want to compare cordless sanders from every brand, my cordless sander reviews cover the field.

Where Ryobi Is Sold

Ryobi tools are sold in physical stores at Home Depot, and Home Depot’s website carries the largest range, according to SlashGear’s guide to buying Ryobi online (read November 20, 2026). That guide adds that Ryobi products on Amazon are mostly sold by independent sellers, and that Walmart sells Ryobi online but not on store shelves.

⚠️ Check the Seller on Amazon

Availability on Amazon varies, and some Ryobi listings are third-party sellers or used and reconditioned units. Look at who ships the tool, whether it is new, and whether the model number matches the one you want before you click Shop Now.

Ryobi or DeWalt?

Ryobi and DeWalt are aimed at different buyers. Ryobi’s ONE+ range is the entry-level choice for homeowners already on its batteries; DeWalt is the step up many pros choose. If you will use a sander a few times a year, Ryobi is the lower-cost way in. If you sand every week, look at DeWalt’s range and weigh the extra cost against daily use. My DeWalt sander lineup sorts that range the same way, and the Milwaukee sanders page covers the third big cordless brand.

One practical point settles most of this decision: battery platforms do not mix. A DeWalt sander does not run on a Ryobi battery, so the best brand is usually the one whose batteries you already own.

Which Ryobi Sander Should You Buy?

If You Own ONE+ Batteries and Want One Sander

Buy the 5″ random orbit sander. It handles the widest range of flat work of any Ryobi sander here.

If You Sand Furniture or Trim

Add the Corner Cat. The two together cover large surfaces and corners, and Ryobi sells them as a pair in a kit.

If You Strip or Level Wood

Choose the P450 belt sander, and expect a heavy tool. For the same job with more choice of brands, see my belt sander reviews.

If You Are Shopping on a Tight Budget

Start with the random orbit sander tool only and use a battery you already have. My list of cheap sanders compares low-price options across brands.

🏆 The Verdict

My pick is the Ryobi ONE+ 5″ random orbit sander for anyone with ONE+ batteries: 10,000 OPM, a 3/32″ orbit and a dust bag. Add the Corner Cat P401 for corners and the P450 belt sander if you need to remove wood fast.

❓ Frequently Asked Questions

What sandpaper fits Ryobi?+
It depends on the tool. The 5″ random orbit sanders take 5″ round discs, the 1/4 sheet sander has a 4-1/4″ x 4-1/2″ pad, and the Corner Cat uses its own corner-shaped sheets. The P450 belt sander takes 3″ x 18″ belts. Ryobi’s product pages do not give hole patterns, so match new discs to your sander’s manual or the listing for your exact model number.
Is Ryobi just as good as DeWalt?+
For occasional home use, a Ryobi sander does the same basic job at a lower cost. DeWalt is aimed at heavier, more frequent use. The deciding factor is often the battery platform you already own, since batteries do not cross brands.
Is Ryobi a Home Depot or Lowes brand?+
Neither owns it. Techtronic Industries lists RYOBI among its brands and states that RYOBI is a registered trademark of Ryobi Limited, used under license. In US stores, SlashGear reports, Ryobi is sold only at Home Depot, which is why people link the two.
Is Ryobi basically Milwaukee?+
They sit under the same group: trade coverage (Operations Equipment Plus, March 2025) calls Techtronic Industries the parent company of Milwaukee Tools, Ryobi and others. They are separate lines with different batteries, prices and target users, so a Ryobi sander is not a Milwaukee sander.

Conclusion

Ryobi makes the most sense when you already own ONE+ batteries. Start with the 5″ random orbit sander, add the Corner Cat for tight spots, and buy the P450 only if you need to remove wood. For a different brand, my cordless sander reviews put them side by side. Questions about which Ryobi to pick? Leave a comment below.

Get new sanding guides and seasonal deals roundups by email, about once a month.

About James Draper

Expert craftsman and passionate about teaching others the art of renewing items by sanding.
Bookmark the permalink.

Leave a Reply

Your email address will not be published. Required fields are marked *