Porter-Cable 7800 Drywall Sander: Who It Suits and What to Watch

As an Amazon Associate I earn from qualifying purchases.
All claims are strictly my personal opinion.

My top pick

DeWalt DWE7800 Corded Drywall Sander

DeWalt DWE7800 Corded Drywall Sander

DeWalt's named replacement for the Porter-Cable 7800: corded 4.7 amps, a 9-inch hook-and-loop pad, AirLock dust port and a 3-year limited warranty.

Porter-Cable drywall sander on a taped drywall seam with dust in the air

If you are looking at a Porter Cable drywall sander, the one on most job sites is the 7800: a corded, 4.7 amp sander with a built-in 13-foot dust hose that suits a DIYer or small crew who want a long-handled sander without paying for a Festool-class system. The catch is that DeWalt’s own press release says its DWE7800 “will replace the legacy PORTER-CABLE Corded Drywall Sander (PC7800),” so new units of the original are getting harder to find and the DeWalt is the one I link.

Below are the specs the maker publishes, who the 7800 fits, what to watch for, the parts that wear, how to hook up a vacuum, what “phased out” really means for this model, and the rivals worth a look.

⚡ Quick Answer

The 7800’s successor: the DeWalt DWE7800, also 4.7 amps and corded, with a 9-inch hook-and-loop pad and a 3-year limited warranty.

Cordless instead: the DeWalt DCE800B runs on 20V MAX batteries and connects to DeWalt extractors.

Finish-grade work: the Festool PLANEX LHS 2-M 225 EQ is made for up to level 5 surfaces.

Porter-Cable 7800 Specs at a Glance

These figures come from the Porter-Cable product page for the 7800. Where the maker is silent, the table says so instead of guessing.

Spec Porter-Cable 7800
Motor 4.7 amps, corded
Speed Variable, 1,400 to 2,000 RPM
Weight 8.5 pounds
Dust hose 13-foot static-dissipating, 1-1/4 inch, built in
Pad and disc size Not stated by the maker; replacement pads are sold as 9-inch
Cord length Not stated; hook-and-loop straps hold the cord to the hose
In the box Sander, sanding pad, hose, straps, manual; vacuum not included
Warranty length Not stated on the product page

What the Design Does

Porter-Cable says the motor sits on the opposite end of the handle from the sanding head for balance and control, and that the head articulates so you can cover a wide area without repositioning. A brush-type skirt around the pad is described as preventing gouging of wall joints while aiding dust collection. Those are the maker’s claims, not my measurements.

Corded Only

There is no battery option. You need an outlet, and with a 13-foot hose already strapped to the cord, you will usually add an extension cord to reach a full room.

Who the Porter-Cable 7800 Suits

Small Remodels and Repeat DIY Jobs

If you are finishing one or two rooms and want to sand taped seams standing up instead of on a ladder, a long-reach sander with a hose attached makes sense. The 7800’s variable speed range gives you room to go gentle near corners and faster on flat fields. My full walkthrough on how to sand drywall covers the grits and the sequence.

Pros Who Already Own a Shop Vacuum

The sander ships without a vacuum, so it fits people who already have a vacuum or extractor with a 1-1/4 inch hose connection. If you do not, budget for one: drywall dust is fine and clogs household filters fast.

Who Should Look Elsewhere

If you are a one-time user, renting is often cheaper than buying any of these; see my guide to drywall sander rental. If you finish to level 5 every week, the rivals below are built for that.

What to Watch Before You Buy

Weight at Arm’s Length

8.5 pounds is the maker’s figure for the body. On a pole-style sander that weight is held out in front of you, so ceiling work tires you faster than wall work. Plan breaks, or share the job.

Head Design and Gouging

The brush skirt and articulating head are Porter-Cable’s answer to digging in at edges. Any disc sander can still leave swirls or gouges if you tilt the pad, so keep it flat and keep it moving. Sand lightly, then check the wall with a work light held low and sideways.

New or Used

Because DeWalt announced its DWE7800 as the replacement, a 7800 you come across may be old stock or a used tool. A used machine has no way for me to verify its condition, so check the pad, hose and cord before you pay.

Parts, Pads and Hose for the 7800

The parts that wear on any disc drywall sander are the pad, the brush skirt, the hose and the drive shaft. Porter-Cable’s page lists a sanding pad and a 13-foot hose in the original kit, and the instruction manual is the place to confirm part numbers for your unit. DeWalt’s release lists “over 4X longer drive shaft life” for its replacement model compared with the PC7800, which hints that the shaft is the part to watch on the older machine.

Pads

Porter-Cable does not state the pad size on its product page, but the parts sold for the 7800 are listed as 9-inch. Porter-Cable’s own 77225 drywall sander pads are a five-pack of 220 grit, foam-backed aluminum oxide pads listed as compatible with the 7800. If you would rather use standard 9-inch hook-and-loop discs, the Norton 9-inch backup pad for the 7800 is a two-pack that mounts with the stock nut. Do not assume a DeWalt pad fits: the DWE7801 soft pad and DWE7802 hard pad are listed for DeWalt’s own sanders, and I have no source that says they fit the 7800.

Hose and Connectors

The 7800’s hose is 13 feet long and 1-1/4 inches. Porter-Cable sells the replacement as the 39780 13-foot hose for the 7800. Keep the hook-and-loop straps: they keep the power cord off the floor and away from the sanding path.

Where to Look for Other Parts

Start with the model number 7800 in the manual and a parts diagram, then check listings that name the 7800 in the title. If a listing does not name the model, skip it.

Dust Hookup: Vacuum and Extractor Options

The 7800 has a hose built in, but you must supply the vacuum. Pick one that moves enough air for fine dust and has a fine filter, since drywall dust passes through basic filters. Read my guide to the best vacuum for drywall dust before you buy, and if you are moving to the DeWalt sanders below, see the DeWalt dust extractors guide.

⚠️ Important

Drywall dust is fine enough to get past a regular shop vacuum filter. Use a vacuum with a fine or HEPA filter, wear a respirator, and seal doorways with plastic.

Is Porter-Cable Being Phased Out?

The brand is not gone, but this particular sander is being replaced. Here is what the sources say.

The Brand

Wikipedia lists Porter-Cable as an American power tool company founded in 1906 and now a subsidiary of Stanley Black & Decker, the same group that owns DeWalt. Its website still carries product pages, warranty information, a retailer locator and a service center locator.

The 7800

DeWalt’s press release, dated March 9, 2021, says the DWE7800 “will replace the legacy PORTER-CABLE Corded Drywall Sander (PC7800).” Porter-Cable’s own page for the 7800 does not mention discontinuation. Some retailers label the 7800 discontinued, but those are store listings, not the maker, so treat it as a model on its way out.

Rivals to the Porter-Cable 7800

If you want a new machine instead of hunting for a 7800, these four are the ones I would compare. I don’t link a 7800 here: DeWalt names the DWE7800 as its replacement, so that is the one I start with. Specs below are the makers’ own where I could read them.

DeWalt DWE7800 Corded Drywall Sander

DeWalt DWE7800 corded drywall sander, the replacement for the Porter-Cable 7800

Best Replacement for the 7800

DeWalt sells the DWE7800 as the 7800’s replacement, and on paper it is the same kind of tool: a corded 4.7 amp sander with an articulating head. DeWalt lists a 9-inch hook-and-loop pad that takes sanding paper and mesh, a variable speed dial, a dual-action trigger for momentary or locked-on use and an AirLock port for DeWalt dust extractors. The box includes a DWE7801 soft backing pad and hose straps, and DeWalt lists a 3-year limited warranty. Its release adds a wider speed range and over 4X longer drive shaft life than the PC7800.

Check price on Amazon


DeWalt DCE800B 20V MAX Cordless Drywall Sander

DeWalt DCE800B cordless drywall sander for taped seams

Best for Going Cordless

DeWalt sells the DCE800B as a tool-only sander: battery and charger are sold separately. It has a brushless motor, a telescoping shaft, an articulating head and a variable speed dial, connects to DeWalt dust extractors through AirLock and can switch an extractor on and off wirelessly when paired with a compatible one. DeWalt lists a 3-year limited warranty, and the DWE7801 and DWE7802 backing pads are sold for both the DCE800 and the DWE7800. DeWalt does not list weight or speed range on the page I read.

Check price on Amazon


Bosch GTR55-85 Drywall Sander Kit

Bosch GTR55-85 drywall sander with extension pole

Best for Ceilings

The GTR55-85 is Bosch’s 9-inch drywall sander. The listing describes an ultra-flexible head, a ceiling-suction mode that takes some of the tool’s weight overhead, a T-handle, a quick-release extension pole, speed and airflow controls at the grip and a flexible dust hose. I could not open a Bosch product page for it, so I am not quoting weight or speed figures here.

Check price on Amazon


Festool PLANEX LHS 2-M 225 EQ Drywall Sander

Festool PLANEX LHS 2-M 225 EQ long-reach drywall sander

Best for Finish-Grade Work

Festool sells the PLANEX in more than one version; the link here is the LHS 2-M 225 EQ (577359). Festool lists its random orbit motion as made for up to level 5 surface quality, with a 400 W motor, 5,000 to 8,500 RPM, an 8-7/8 inch abrasive, a 55-inch length, an 8.82 lb weight and a 13-foot cable. The listing adds adjustable suction that lets it hold its own weight on walls and ceilings. Festool says dust extraction works with the matching Festool dust extractor, so compare it with the 7800 for the cost of the extractor plus the sander itself.

Check price on Amazon


Porter-Cable vs DeWalt in Plain Terms

Both brands sit under Stanley Black & Decker, and DeWalt’s own release calls its sander the replacement for the 7800. So for this tool the practical question is not which brand is better but which machine you can actually buy new. For a wider comparison, see my guide to the best sanders for walls and drywall.

How I Put This Page Together

Specs come from the Porter-Cable product page for the 7800, DeWalt’s March 2021 press release and its DWE7800 and DCE800B pages, Festool’s page for the PLANEX LHS 2-M 225 EQ, and the product listings for the Bosch and the replacement parts. I have not run these sanders myself; every figure is the maker’s or the listing’s own. I do not show prices or customer ratings, which change daily. More on how I choose the tools I recommend.

🏆 The Verdict

The Porter-Cable 7800 is a reasonable corded wall sander if you already own one or find a new one, and replacement pads and a hose are made for it. For a new machine, buy what DeWalt calls its replacement, the DeWalt DWE7800. If you want cordless, look at the DeWalt DCE800B; for finish-grade work, the Festool PLANEX.

❓ Frequently Asked Questions

Is Porter Cable being phased out?+
The brand is still active: its website carries product pages, warranty information and a retailer locator, and Wikipedia lists it as a Stanley Black & Decker subsidiary. This drywall sander is a different story, since DeWalt’s 2021 release says the DWE7800 will replace the PC7800.
Is Porter Cable still in business?+
Yes, as a brand. Its website is live with warranty information and retailer and service center locators, and Wikipedia describes it as a subsidiary of Stanley Black & Decker. I found no maker statement that the brand has closed.
Is Porter Cable as good as DeWalt?+
I cannot rank them from my own use. On paper both brands sit under the same owner, and for drywall sanders DeWalt positions its DWE7800 as the upgrade, citing a wider speed range and longer drive shaft life. Judge by the specific model you can buy.
What is the best drywall sander on the market?+
It depends on the job. For finish-grade surfaces, Festool says its PLANEX is made for up to level 5. For a corded tool in the 7800’s mold, DeWalt’s DWE7800 is its named replacement. For cordless freedom, DeWalt’s DCE800B is a tool-only 20V MAX option. My best sanders for walls and drywall page compares more.

Conclusion

The Porter-Cable 7800 is a straightforward corded drywall sander with a built-in hose, but DeWalt says the DWE7800 replaces it. If you already own a 7800, the pads and hose above keep it running; if you are buying new, the DeWalt DWE7800 is the direct successor, and the DCE800B, Bosch and Festool options above cover cordless, ceilings and finish-grade work.

Get new sanding guides and seasonal deals roundups by email, about once a month.

About James Draper

Expert craftsman and passionate about teaching others the art of renewing items by sanding.
Bookmark the permalink.

Leave a Reply

Your email address will not be published. Required fields are marked *