As an Amazon Associate I earn from qualifying purchases. All claims are strictly my personal opinion.
My top pick

Bosch ROS20VSC 5-Inch Variable Speed Palm Random Orbit Sander
The Bosch to start with: variable speed from 7,500 to 12,000 OPM, a 2.5 amp motor, a 5-inch hook-and-loop pad, and a kit with dust canister and carrying bag.
Most people shopping for a Bosch sander should start with the corded ROS20VSC 5-inch random orbital, and step up to the dual-mode GET75-6N only if they need to remove a lot of material. Bosch lists the ROS20VSC at 2.5 amps with variable speed from 7,500 to 12,000 OPM, a 3.5 lb body and a microfilter dust canister. If you already own Bosch 18V batteries, the brushless GEX18V-5N is the cordless 5-inch, and the rest of the blue line covers a single-speed palm sander, a 6-inch random orbital, a half-sheet sander and a drywall sander.
Bosch sells several sanders with similar-looking names, and the letters at the front tell you more than the numbers. Below I sort every model by the job it does, explain how the names work, say which one I’d buy for which kind of work, and show where Bosch stands next to DeWalt. Every spec comes from Bosch’s own product pages, and where Bosch doesn’t state something, I say “not stated” instead of guessing.
Every Bosch Sander at a Glance
Here is the lineup this guide covers, with the figures Bosch prints on each model’s US product page. Most of these are corded. The GEX18V-5N is sold as a bare tool, so the battery and charger are extra.
| Model | Type | Pad | Power and speed | Best for |
|---|---|---|---|---|
| ROS20VSC | Corded palm random orbital | 5 in hook and loop | 2.5 amp, 7,500 to 12,000 OPM | General smoothing and finish prep |
| ROS10 | Corded palm random orbital | 5 in, 8-hole hook and loop | 2.5 amp, 12,000 OPM single speed | Light, simple sanding |
| GEX34-6N | Corded 6-inch random orbital | 6 in multi-hole | 3.3 amp, 5,500 to 12,000 OPM | Large panels, auto body, decks |
| GET65-5N | Corded 5-inch dual-mode | 5 in multi-hole | 6.5 amp, 3,300 to 7,800 OPM | Stock removal, then finish |
| GET75-6N | Corded 6-inch dual-mode | 6 in multi-hole | 7.5 amp, 3,300 to 7,300 OPM | Heavy stock removal, big surfaces |
| GEX18V-5N | 18V brushless random orbital | 5 in, 8-hole hook and loop | 6,000 to 10,000 OPM | Cordless smoothing |
| OS50VC | Corded half-sheet sander | 4-1/2 x 9 in, SheetLoc clamp | 3.4 amp, 8,000 to 11,000 OPM | Large flat panels, cabinets |
| GTR55-85 | Corded drywall sander | 9 in disc, 8.5 in pad | 4.5 amp, variable speed | Walls and ceilings |
How I Sorted the List
I grouped the models by what the tool does to the surface. A random orbital smooths and preps, a dual-mode sander can also hog off material, a half-sheet sander flattens panels, and a drywall sander works on joint compound. Corded or cordless is a second choice, and the cordless Bosch gets its own section.
What Bosch Doesn’t Publish
Bosch’s page for the GET75-6N gives one combined OPM range instead of a figure for each mode, and the GET65-5N page lists a speed range in RPM that doesn’t line up neatly with its OPM range. The GTR55-85 page doesn’t list a speed range or a noise level. Orbit size changes how aggressive a sander feels, so if a spec like that decides your purchase, check the current listing before you order.
How to Read Bosch Model Names
Bosch doesn’t publish a naming guide. A Bosch press release introducing the GEX33-5N, GEX33-6N and GEX34-6N doesn’t explain the letters either, so the notes below describe what the product pages show, not an official rule.
ROS: Palm Random Orbitals
The two palm sanders start with ROS, short for random orbit sander, and both are 5-inch, 2.5 amp tools. The difference is the speed dial: Bosch lists the ROS20VSC at 7,500 to 12,000 OPM and the ROS10 at a single 12,000 OPM.
GEX: Random Orbit Sanders
The GEX models are the full-size random orbital sanders, in corded and 18V versions. The corded GEX34-6N is a 6-inch with a variable speed dial. The cordless one is the GEX18V-5N, where the 18V is in the name. On the corded models, the size is the digit before the N: Bosch’s page names the GEX34-6N a 6-inch sander, and the 5-inch and 6-inch GEX33 models in the same release follow the pattern. What the N stands for isn’t stated.
GET: Dual-Mode Turbo
The GET models, the GET65-5N and GET75-6N, are the dual-mode sanders. Bosch’s pages describe a switch between standard random-orbit mode and a direct-drive turbo mode, and say turbo removes stock about three times faster than standard random-orbit mode. The pad sizes follow the same rule as the GEX line, with the 5 or 6 after the dash.
OS, GTR and the Rest
The OS50VC is Bosch’s half-sheet orbital finishing sander, and the GTR55-85 is the 9-inch drywall sander. A few model pages say which older Bosch sander they replace: the GET75-6N replaces the 1250DEVS, and a Bosch press release says the GEX34-6N replaces the ROS65VC-6. Keep that in mind if you have an old Bosch sander and wonder what fits.
Random Orbital Sanders: ROS20VSC, ROS10 and GEX34-6N
A random orbital sander is the one to buy if you can only own one. It spins the pad and moves it in small ellipses at the same time, which leaves fewer visible scratches than a sander that only vibrates. For a look at the type across all brands, my guide to the best random orbital sanders ranks them side by side.
Top pickCorded 5-inch palm random orbital
Bosch ROS20VSC
Bosch ROS20VSC 5-Inch Variable Speed Palm Random Orbit Sander
Variable speed from 7,500 to 12,000 OPM on a 5-inch pad, with microfilter canister, hose adapter and carrying bag in the kit.
Check price on AmazonSpecs: Bosch
Best for
Most buyers: furniture, cabinets, decks and paint prep.
- Variable speed dial
- Dust canister and carrying bag included
- Pad dampening brake
Skip it if
You need fast stock removal or a 6-inch pad.
- Top speed same as the cheaper ROS10
Read full review
Best Bosch Sander for Most People
The ROS20VSC is the Bosch I’d pick for most DIY work. Bosch lists a 2.5 amp motor with variable speed from 7,500 to 12,000 OPM, a 3/32 inch orbit, a 5-inch pad and a weight of 3.5 lbs. The kit includes a sanding disc, a soft sanding pad, a dampening ring, a microfilter dust canister, a vacuum hose adapter and a carrying bag, and the page lists a 1-year limited warranty. Bosch also lists an integral pad dampening brake to help prevent swirl marks. I keep this section short on purpose, because I cover the model in full in my Bosch ROS20VSC review.
Bosch ROS10 5-Inch Single-Speed Palm Random Orbit Sander
Best Simple Bosch Palm Sander
The ROS10 is the same size of tool as the ROS20VSC without the speed dial. Bosch lists a 2.5 amp motor at a single 12,000 OPM, a 3/32 inch orbit, a 5-inch pad that takes standard 8-hole hook-and-loop discs, and a weight of 3.5 lbs. The kit includes a soft backing pad, one sanding disc, a dampening ring, a microfilter dust canister and a vacuum hose adapter. Bosch doesn’t include a carrying case, and the page lists a 1-year limited warranty.
Single speed is fine for a lot of jobs, and it means one less control to think about. What you give up is the low end: at a fixed 12,000 OPM you can’t slow the pad for delicate finishes. If you also want to compare palm sanders across brands, my best palm sanders guide covers them. I don’t link a listing for the ROS10 here; the ROS20VSC above is the one I’d buy.
- ✅ Light at 3.5 lbs, with a built-in microfilter canister
- ✅ Takes standard 5-inch, 8-hole discs
- ✅ Disc, soft pad and hose adapter in the kit
- ❌ Single speed and no carrying case
Best For: Occasional sanding when you don’t need a speed dial.
Bosch GEX34-6N 6-Inch Multi-Hole Random Orbit Sander
Best Bosch for Big Surfaces Without Going Dual-Mode
The GEX34-6N is the 6-inch random orbital for people who want a bigger pad and a speed dial. Bosch lists a 3.3 amp motor with variable speed from 5,500 to 12,000 OPM, a 5/32 inch orbit, a 6-inch pad and a weight of 5.3 lbs. Bosch’s press release for the family gives 4,500 to 12,000 OPM, so I go with the product page and flag the gap. The page lists a vibration level under 2.5 m/s2, and the kit includes a medium multi-hole backing pad, a hex pad wrench, a sanding disc, a removable front handle, a microfilter dust canister and a vacuum hose adapter. No carrying case is included.
One thing to know before you buy discs: Bosch says the multi-hole pad is compatible with many sandpaper brands, and its release says the GEX models work only with multi-hole backing pads. Check that your discs match the pad, or dust collection suffers. I don’t link a listing for the GEX34-6N here; look for it at a Bosch dealer.
- ✅ Variable speed, 5,500 to 12,000 OPM
- ✅ 5/32 inch orbit and a 6-inch pad
- ✅ Removable front handle for tight spots
- ❌ 5.3 lbs, no carrying case
Best For: Large panels, auto body prep and decks where a 6-inch pad saves time.
Dual-Mode Turbo: GET65-5N and GET75-6N
The GET sanders are Bosch’s answer to the one-tool-does-both problem. Flip the switch to turbo and the pad is driven directly in an eccentric orbit for fast stock removal. Flip it back and you’re in standard random-orbit mode for finishing. Bosch says turbo removes stock about three times faster than standard mode. If you strip paint, level old finishes or work big surfaces, these are the Bosch sanders to look at, and my guide to the best sanders for floors shows where this kind of tool fits next to bigger machines.
Best for stock removalCorded 6-inch dual-mode random orbital
Bosch GET75-6N
Bosch GET75-6N 6-Inch Dual-Mode Random Orbit Sander
A 7.5 amp 6-inch dual-mode sander with turbo mode and constant speed under load.
Check price on AmazonSpecs: Bosch
Best for
Removing paint and old finish, and leveling large surfaces.
- Turbo mode, about 3x stock removal per Bosch
- Constant speed under load
- Auxiliary handle mounts on either side
Skip it if
You mostly do light furniture work.
- 5.7 lbs and 15 inches long
- Separate OPM for each mode not stated
Read full review
Best Bosch for Heavy Stock Removal
The GET75-6N is the biggest random orbital in the line. Bosch lists a 7.5 amp motor, a 6-inch pad, 3,300 to 7,300 OPM and a 0.18 inch orbit radius, at 5.7 lbs. The page says it holds a constant speed under load, with a die-cast aluminum gear housing and a dual-bearing pad mount to reduce wobble and vibration. The slim grip is a soft-grip design, the auxiliary handle mounts on either side, and the dust port takes an extension dust tube and an adapter for 35 mm, 1-1/4 inch and 1-1/2 inch hoses. The kit includes a medium backing pad, a hex pad wrench, a sanding disc, a removable front handle and two vacuum hose adapters. The warranty is listed as 1 year limited.
The cost of that power is size. It is 15 inches long on Bosch’s page and heavier than any palm sander here, so it suits a bench, a flat run or a wall, not one-handed trim work.
Corded 5-inch dual-mode random orbital
Bosch GET65-5N
Bosch GET65-5N 5-Inch Dual-Mode Random Orbit Sander
A 6.5 amp 5-inch dual-mode sander with a direct-drive turbo mode, 3,300 to 7,800 OPM.
Check price on AmazonSpecs: Bosch
Best for
Stock removal when a 6-inch pad is too much.
- Turbo mode, about 3x stock removal per Bosch
- Multi-hole pad
- Built-in dust port
Skip it if
You only do light finishing.
- No case
- RPM and OPM figures not reconciled on the page
Read full review
Best Smaller Dual-Mode Bosch
The GET65-5N is the 5-inch version. Bosch lists a 6.5 amp motor, 3,300 to 7,800 OPM, a 0.09 inch orbit radius and a 5-inch pad, at 5.3 lbs and 13.7 inches long. The page also shows a speed range in RPM, but Bosch doesn’t explain how that relates to the OPM range, so I treat the OPM figure as the one to go by. The kit includes a medium backing pad, a hex pad wrench, a sanding disc, a removable front handle and vacuum hose adapters, with no case. The page lists a 1-year limited warranty for corded tools, and doesn’t say which model it replaces.
It’s the choice if you want turbo-mode power but find 6 inches too much pad. Next to the GET75-6N, the 5-inch pad is easier to steer, and the orbit radius is smaller, so I’d expect it to be gentler in standard mode. Bosch doesn’t publish a head-to-head, so that last part is my reading of the specs, not a measured result.
Cordless: GEX18V-5N
Bosch’s cordless sanders run on its 18V system. The GEX18V-5N below is sold as a bare tool or as the GEX18V-5B15 kit with a battery and charger, and the kit is the listing I link. If you already own Bosch 18V batteries, the bare tool is the easy addition. For other brands, see my best cordless sanders.
Best cordless18V brushless 5-inch random orbital
Bosch GEX18V-5N (GEX18V-5B15 kit)
Bosch GEX18V-5N 18V Brushless 5-Inch Random Orbit Sander (GEX18V-5B15 Kit)
A brushless 18V 5-inch random orbital, 6,000 to 10,000 OPM, 2.4 lbs, sold as bare tool.
Check price on AmazonSpecs: Bosch
Best for
Owners of Bosch 18V batteries who sand away from an outlet.
- Lightest Bosch sander here
- Brushless motor
- 5-year limited warranty on Bosch 18V tools
Skip it if
You don't own Bosch 18V batteries.
- The bare tool has no battery or charger; the linked kit includes them
Read full review
Best Cordless Bosch Random Orbital
Bosch lists the GEX18V-5N with a brushless motor and variable speed from 6,000 to 10,000 OPM, a 3/32 inch orbit, a 5-inch 8-hole hook-and-loop pad and a weight of 2.4 lbs. It includes a medium backing pad, a sanding disc and a dust bag, and you can also attach a vacuum hose. Bosch recommends its CORE18V 4 Ah, 6 Ah and 8 Ah batteries, none of which come with the tool, and the page lists a 5-year limited warranty on Bosch 18V cordless tools.
Next to the corded ROS20VSC, it’s lighter by Bosch’s figures, 2.4 lbs against 3.5, and its top speed is 10,000 OPM against 12,000. It also drops the cord, which matters on a ladder or outdoors. Bosch’s page lists the kit version with a battery and charger, the GEX18V-5B15, which is the listing I link for anyone without Bosch batteries yet.
Sheet Sander: OS50VC
A sheet sander takes sandpaper cut from a standard sheet, which makes the paper cheap and easy to find. The square front gets into corners a round pad can’t reach, and the shape is built for flat panels.
Bosch OS50VC Half-Sheet Orbital Finishing Sander
Best Bosch for Large Flat Panels
Bosch lists the OS50VC with a 3.4 amp motor, variable speed from 8,000 to 11,000 OPM, a 3/32 inch orbit and a 4-1/2 by 9 inch pad, at 6 lbs. The SheetLoc Supreme clamp pulls regular sandpaper flat and tight, and the sander also accepts stick-on paper. You get a choice of a microfilter dust canister or a vacuum hose connection with airflow control, and the sander sands flush on three sides. The kit includes the canister, a VAC024 hose adapter, an auxiliary handle, a sanding pad, a punch plate and a sanding sheet, with no case. The page lists a 1-year limited warranty badge but the badge text refers to 18V products, so check Bosch’s warranty page for the terms on this corded tool.
For cabinet fronts, tabletops and doors, it covers a flat run quickly. It’s the heaviest hand sander here, so for small pieces and corners you’ll want something lighter. My comparison with the other kind of tool is covered in my best random orbital sanders page. I don’t link a listing for the OS50VC here; look for it at a Bosch dealer.
- ✅ Variable speed, 8,000 to 11,000 OPM
- ✅ Two dust options and flush sanding on three sides
- ✅ Punch plate and auxiliary handle included
- ❌ 6 lbs, no case
Best For: Cabinet fronts, tabletops and large flat panels.
Drywall: GTR55-85
Drywall sanding is its own job, with its own tool: a big round head on a pole, a vacuum hose and a lot of fine dust. Bosch makes one model for it, and my best sanders for walls and drywall guide shows how it stacks up against others.
Corded 9-inch drywall sander
Bosch GTR55-85
Bosch GTR55-85 9-Inch Drywall Sander Kit
A 4.5 amp drywall sander with a flexible head, ceiling-suction mode, extension pole and carrying case.
Check price on AmazonSpecs: Bosch
Best for
Sanding joint compound on walls and ceilings.
- Ceiling-suction mode
- Quick-release pole
- Case and pole in the kit
Skip it if
You only patch a spot or two.
- 9.04 lbs
- Speed range not stated
Read full review
The Bosch for Walls and Ceilings
Bosch lists the GTR55-85 with a 4.5 amp motor, variable speed control, a 9-inch disc on an 8.5 inch pad, at 9.04 lbs. The page describes an ultra-flexible head, a ceiling-suction mode to cut the weight you hold overhead, a T-handle grip, a quick-release extension pole, a removable brush for sanding near corners and a flexible dust hose. The kit includes a sanding sheet, a GTR801 soft backing pad, the GTR024 extension pole, hose clips, a wrench, a VAC024 hose adapter and a carrying case. The page lists a 1-year limited warranty for the corded tool. It states the tool is for joint compound and plaster on ceilings and walls, and doesn’t list a speed range or noise level.
This one is a specialist. Buy it if you finish drywall regularly. If you only sand a patch or two, a regular random orbital with a vacuum hooked up is enough.
Which Bosch Sander Should You Buy?
For Furniture, Cabinets and Decks
The ROS20VSC is my pick if you’ll mostly be near an outlet and want a speed dial. Add the OS50VC if you also sand large flat panels.
For a Cheap, Simple Palm Sander
The ROS10 is the same kind of tool at a single speed. I’d choose the ROS20VSC if you work with finishes, and the ROS10 if you mostly rough-sand.
For Stock Removal
The GET75-6N for big surfaces, and the GET65-5N if you’d rather have a 5-inch pad. For a 6-inch sander with a speed dial and less power, the GEX34-6N is the middle option.
For Job Sites and Owners of Bosch 18V Batteries
The GEX18V-5N, with the battery and charger in your budget. If you already have CORE18V batteries, it’s the obvious choice.
For Drywall
The GTR55-85 if you finish joint compound often, and nothing specialized if you only patch.
Which to Skip
I’d skip the GET75-6N for light furniture work: it’s more tool than you need, and the 5.7 lbs will tire you out. I’d skip the drywall sander if you sand drywall once a year.
Bosch vs DeWalt
Both brands sell a corded 5-inch random orbital with a variable speed dial and a dust system, so the model numbers are the easy part of the comparison. Here is how the two entry models line up on what each maker publishes.
| Spec | Bosch ROS20VSC | DeWalt DWE6423K |
|---|---|---|
| Motor | 2.5 amp | 3.0 amp |
| Speed | 7,500 to 12,000 OPM | 8,000 to 12,000 OPM |
| Pad | 5 in hook and loop | 5 in hook and loop |
| Orbit | 3/32 in | Not stated |
| Weight | 3.5 lbs | Not stated |
| In the kit | Dust canister, hose adapter, carrying bag | Dust bag, carrying case |
| Warranty | 1 year limited | 3 years limited, 1 year free service, 90-day satisfaction guarantee |
On those figures the two tools are close. DeWalt lists the bigger motor and the longer warranty, while Bosch publishes the orbit and weight that DeWalt’s page leaves out and has a slightly lower bottom speed. Neither is a better tool in the abstract: the better buy is the one that matches the batteries and accessories you already own. For the full set of DeWalt models, see my DeWalt sanders guide.
How I Put This Guide Together
The product facts come from Bosch’s own US product pages for each model: the ROS20VSC, ROS10, GEX34-6N, GET65-5N, GET75-6N, GEX18V-5N, OS50VC and GTR55-85, plus a Bosch press release for the GEX family and DeWalt’s page for the DWE6423K in the comparison. Where a page doesn’t state a figure, I say so. Warranty badges are reported as badges, with a pointer to Bosch’s terms. I don’t show customer ratings or prices, which change daily. More on how I choose the products I recommend.
🏆 The Verdict
For most buyers, the ROS20VSC is the Bosch sander to buy: variable speed from 7,500 to 12,000 OPM, a 5-inch pad and a kit with a dust canister and carrying bag. If you strip or level a lot of material, step up to the GET75-6N. If you own Bosch 18V batteries, the GEX18V-5N gives you a cordless 5-inch.
❓ Frequently Asked Questions
Which Bosch sander is best?+
Is Bosch a good sander?+
Which is better, a Bosch or DeWalt orbital sander?+
Which sander is better, Bosch or Festool?+
What do GEX, GET and ROS mean in Bosch model names?+
Conclusion
Bosch’s sander lineup covers the common jobs, and the quickest way to choose is by what you do to the surface. Start with the ROS20VSC if you plug in, the GEX18V-5N if you already own the batteries, and the GET75-6N when you need to remove material fast. For other brands and other sander types, my best random orbital sanders and best palm sanders pages put them side by side.




